A Glass Scrap Import License refers to a type of legal permit granted by the governmental agencies of a particular country to allow the importer to bring in glass wastes or scrap items into the country. This license is required in order to ensure that the glass scrap imported does not pose any environmental, safety and quality risks to the importing country. Some of the legal requirements that are normally implemented during the license process include environmental clearances, no toxic junk in the scrap, and compliance with international treaty on environmental waste.
In India, the import of glass scrap is permitted under the Hazardous and Other Wastes (Management and Transboundary Movement) Rules 2016 as well as other guidelines provided by the MoEFCC and the DGFT respectively.
Advantages of Glass Import License in Punjab
- Steady Supply: The license also guarantees the supply of more glass scrap in a more consistent manner, thus being of great benefit to industries that use scrap glass in its production.
- Cost-Effective: Purchasing glass scrap from other countries is cheaper than procuring virgin materials locally if the later is available and readily in limited quantities.
- Sustainability: Re-use of glass scrap keeps the Virgin material usage to a minimum thus minimizing on the exploitation of the natural resources which are destructive to the environment when mining is practiced.
- Waste Reduction: The buying and recycling of glass scrap further prevent wastes from ending up in the landfill, and assist in waste control and conserving the environment.
- Quality Assurance: Purchased goods for circulation are sometimes inspected for quality of the materials used in its production; this influences the quality of the products in circulation.
- Global Sourcing: The import license implies that the buying businesses is capable of sourcing the glass scrap from other parts of the world where they may find better quality of the raw materials or even cheaper ones.
Classification of Glass Scrap in Punjab
- Non-hazardous glass scrap: This can include clean, uncontaminated glass cullet used for recycling.
- Hazardous glass scrap: If the glass scrap is contaminated with hazardous substances, it may require additional clearances.
Import Licensing Requirements in Punjab
- Non-hazardous glass scrap: Generally, non-hazardous glass scrap falls under Open General License (OGL) category, which means it can be imported without requiring a special license, but certain documentation is necessary.
- Hazardous glass scrap: Importers must obtain prior permission from the MoEFCC and may need to apply for a license from DGFT.
Documents Required for Glass Scrap Import License in Punjab
1) Business Registration Documents
- Company Registration Certificate: Proof that your company is legally registered.
- Tax Identification Number (TIN): This is essential for any commercial activity.
- Import Export Code (IEC): Necessary for any import/export activity.
2) Application Form
- A filled application form for the import license, usually available from the relevant regulatory body, such as the Ministry of Environment, Customs Department, or a similar entity.
3) Environmental Clearance
- Pollution Control Clearance: A document from the local or national environmental authority ensuring that the import of glass scrap complies with environmental standards.
- No Objection Certificate (NOC): Sometimes required from environmental agencies.
4) Waste Management Plan
- A detailed plan outlining how the imported glass scrap will be managed, including recycling or disposal processes.
5) Details of Import
- Bill of Lading or Airway Bill: Shipping document showing details of the consignment.
- Proforma Invoice: Issued by the exporter, stating the type and quantity of glass scrap.
6) Quality Assurance Documents
- Pre-shipment Inspection Certificate: Sometimes required to confirm that the glass scrap meets certain standards.
- Material Safety Data Sheet (MSDS): If required, this document outlines the safety and handling procedures for the scrap material.
7) Bank Documents
- Letter of Credit (L/C): Commonly required for the financial transactions involved in import.
- Bank Guarantee: If applicable, to ensure payment or compliance with the import regulations.
8) Insurance Documents
- Insurance coverage for the consignment during transport.
9) Compliance with International Conventions
- Basel Convention Compliance: For hazardous wastes, ensure compliance with the Basel Convention regulations, if applicable.
10) Other Relevant Permits
- Any other permits or approvals required by the local or national government, which might include permits related to hazardous waste handling if the glass scrap is classified as such.
11) Customs Documents
- Customs Declaration Form: Necessary for clearing the shipment through customs.
- Import License: The official license granted after the submission and approval of all required documents.
12) Additional Documentation
- Agreement or Contract with Supplier: Proof of agreement with the exporter.
- List of Machinery/Equipment: Used for processing the imported scrap, if applicable
Procedure for obtaining Glass Scrap Import License in Punjab
- Import of glass scrap would fall under "other wastes" as defined in the Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016.
- For importing other wastes listed in Part B of Schedule III:
- Permission is required from the Ministry of Environment, Forest and Climate Change (Rule 12(4))
- The importer needs to be an "actual user" of the waste (Rule 12(4))
- The importer needs to apply to the Ministry of Environment, Forest and Climate Change in Form 5 along with required documents (Rule 13(1))
- A copy of the application should be sent simultaneously to the concerned State Pollution Control Board (Rule 13(1))
- The importer needs to obtain:
- Valid consent under the Water Act and Air Act (Rule 6(1))
- Authorization from the State Pollution Control Board for handling hazardous/other wastes (Rule 6(1))
- Import license from Directorate General of Foreign Trade, if applicable (Rule 13(2)(a))
- The waste can be stored for up to 90 days, which can be extended to 180 days in some cases (Rule 8)
- Records of the imported waste need to be maintained and annual returns filed with the State Pollution Control Board (Rule 6(5))
- Glass waste is listed under Basel No. B2020 in Part B of Schedule III. This includes: "Cullet and other waste and scrap of glass except for glass from cathode-ray tubes and other activated glasses"
- Wastes in Part B are restricted and cannot be imported without:
- Permission from the Ministry of Environment, Forest and Climate Change
- A license from the Directorate General of Foreign Trade, if applicable
- Glass scrap is not listed in Part D, which covers wastes that can be imported without permission from the Ministry of Environment, Forest and Climate Change. However, the importer shall furnish required information as per Form 6 to the custom authorities with accompanied documents listed in schedule VIII.
- For items listed in Part B like glass scrap:
- Import is only allowed for actual users authorized by the State Pollution Control Board
- Permission is required from the Ministry of Environment, Forest and Climate Change
Additional Conditions in Punjab
- The copy of permission shall be furnished to the Port and Customs authorities, Central Pollution Control Board and the concerned State Pollution Control Board for adherence of their respective roles mentioned in Schedule VII.
- In the case of hazardous and other wastes importation, the importer shall complete and submit Form 3 in relation to the hazardous and other waste imported by him and the record so kept shall be open for inspection.
- The importer of the hazardous and other wastes shall submit an annual return in Form 4 to the State Pollution Control Board on or before 30th of June of the financial year to which that return relates.
- Any hazardous and other wastes imported for purposes of testing or research and development up to a quantity of 1000 gm or 1000 ml does not require permission to import under these rules
- The Port and Customs authorities shall ensure that the shipment is accompanied by the movement document as given in Form 6 You must also submit a test report of the analysis of the waste.
- Wherever applicable, from a laboratory which has been accredited or recognized by the exporting country. According to the statute, the customs may as well seek to confirm the analysis whenever they have doubts.
How Whizseed can help you in Punjab?
- Expert Guidance and Consultation: With our deep understanding of the requirements, including those set by the Ministry of Environment, Forest, and Climate Change (MoEFCC), we guide you through every step, ensuring compliance with all regulations.
- Document Preparation and Submission: We assist in gathering and preparing all necessary documentation, from business registration and environmental clearances to quality assurance and customs documentation, ensuring nothing is overlooked.
- Customized Solutions: Understanding that every business has unique needs, we tailor our services to ensure your specific requirements are met efficiently.
- Dedicated Support: We provide continuous support throughout the application process and beyond, ensuring you remain compliant with all ongoing regulatory requirements.